what to use to fill holes in wood

Download Article

Download Article

Information technology's very easy to damage forest and create a large hole. Whether your item is a wooden wall or a piece of furniture, you can easily repair it using some craft sticks and forest filler. One time you lot've covered the hole with forest filler, prime and paint it to give information technology a smooth, new stop.

1. 1

   Assemble your materials. Select water-based wood filler, primer, and pigment if the item you are repairing is kept indoors, or solvent-based wood filler and oil-based primer and paint if the item will exist placed outdoors. You'll too need craft sticks, dispensable plates, PVA glue, woods gum, 120-grit sandpaper, and paintbrushes or rollers.^[1]

   • Gather onetime wearing apparel, rags, a sheet or drop material, painter'south tape, and a paint stirrer equally well.

2. 2

   Glue craft sticks together to embrace the hole. The craft sticks will provide a support for you lot to apply the woods filler to. Inspect the size of the hole and make up one's mind how many craft sticks information technology would take to embrace it.^[2]

   • For instance, if a hole can be filled by 3 arts and crafts sticks, lay them apartment on a work surface side past side. Pour mucilage over the back of the 3 arts and crafts sticks. Place 3 more arts and crafts sticks on top of the first three to create a strong layer that'southward stuck together properly.
   • The amount of craft sticks y'all'll accept to employ depends on the size of the hole.
   • Give the glue 10 to 15 minutes to dry out.

   Advertizing

3. 3

   Place the arts and crafts sticks on the back of the hole and secure them with woods mucilage. Identify the mucilage around the border of the hole in your wood. You should lay the arts and crafts sticks on the side they won't be seen from. If you're filling a hole in a chiffonier, wall, or a wardrobe, place the craft sticks on the inside of the hole.^[three]

   • If yous're covering a hole in a wall or wood that you can't place on a flat surface, you might demand to concur the craft sticks for 5 minutes so they stick to the glue.

   Advertisement

1. i

   Mix your wood filler using a craft stick and a disposable newspaper plate. Follow the directions on the tin of the wood filler you're using. Directions vary depending on the manufacturer. At that place'south no need to mix a large amount of forest filler. A pocket-sized corporeality of wood filler on the plate will do the job.^[iv]

   • Ensure that the room is well ventilated as wood filler has a very stiff smell.
   • The filler is fully mixed when information technology turns orangish-dark-brown in color.

2. 2

   Apply the forest filler to the craft sticks to fill the hole. Once your wood filler is mixed, use information technology rapidly. Apply the filler to the arts and crafts sticks using another craft stick or a putty pocketknife. The craft sticks will act as a support for the wood filler. The filler should exist level and even with the surface of the wood.^[5]

3. 3

   Let the filler dry for ane hour before using 120-grit sandpaper on information technology. One time the filler is dry, rub information technology with 120-grit sandpaper. You will demand to employ a decent amount of pressure when rubbing the filler with the sandpaper. Keep using the sandpaper until it'south level with the rest of the wood.^[6]

   • If you lot're using a pad sander on the filler, use 220-dust sandpaper instead. Pad sanders are handheld devices that tin powerfully sand wood.

4. 4

   Utilize a textile to clean the forest and remove the dust. Concord your fabric under the tap for a couple of seconds and wipe the surface area of the wood you only filled in. Yous might demand to wipe the expanse a couple of times if the pigsty was very big or if yous used a lot of filler.^[7]

   • Wiping the area with a material is besides necessary before you prime number the forest.

   Advertisement

1. 1

   Place a sheet on the floor or on your work surface before yous prime. If you're painting a wooden wall, identify a canvass on the flooring to grab whatsoever drips of pigment. If you're painting a wooden cabinet or another item that you can movement, place it on summit of a sheet to ensure maximum protection for the surrounding area.^[8]

   • Move any piece of furniture abroad before you paint. If the furniture is as well big to move, embrace it with some other sheet.
   • Embrace baseboards, hinges, and other items with painter'southward record if you need to.

2. 2

   Apply a primer to the wood. Primer makes information technology easier for the pigment to stick to the surface of the item you're painting. If you're painting a wooden wall and you have the paint you used for the rest of the wall when you lot originally painted information technology, y'all'll merely need to prime number the area you filled in with woods filler. If you want to paint the unabridged surface area of the wooden object, you'll need to prime it all.^[ix]

   • Use a roller to prime a wall and a paintbrush to prime smaller objects.

3. 3

   Give the primer three hours to fully dry out. Primer tin can dry within 2 hours of being applied to an item. However, if you lot paint the primer before it's dry, you'll ruin the item you're painting. By giving it iii hours to fully dry, you allow for the primer to dry completely.

   • Don't paint over the primer before it's completely dry. Primer can feel dry to the touch on without being fully dry.

4. 4

   Apply the first coat of pigment to the wood. Once the primer has completely dried, use a paintbrush or a roller to apply the first coat to the forest. Rollers volition work best on walls and other flat surfaces. Paint other surfaces using a flat or tapered paintbrush.^[10]

   • If yous're only painting over the filler, apply the same paint yous painted the rest of the item with. If yous can't discover that paint, get to the local paint store and take paint strips. Hold these strips to the woods to find the right color of paint.
   • Don't be afraid to use plenty of paint. It's better to apply too much paint to the detail than as well trivial. Brand certain you lot brush the paint so it evenly covers the surface of the item.
   • Use fifty-fifty and measured strokes similar yous used to apply the primer.

5. v

   Requite the first glaze two to 3 hours to completely dry. You should give the paint fourth dimension to properly dry into the wood. This will take two hours at the very least. Exam if the paint is dry out by dabbing it with a tissue. Audit the tissue after for signs of paint. If at that place's no paint on the tissue, the pigment is dry and you can employ the second coat.^[11]

   • Consider leaving the paint dry out overnight to ensure information technology'south completely dry out.

6. 6

   Utilize the second coat of paint to the wood. Afterwards the first coat has fully dried, utilize even and measured strokes once again to utilize the second glaze. Once you finish applying the second coat, await at the wood and decide if it needs another coat. If the pigment doesn't look right on the wood, information technology will probably need another coat.^[12]

7. 7

   If you decide to employ another coat, follow the procedure once again. Give the second coat 2 to 3 hours to dry before painting the third coat.

   Ad

Add together New Question

• Question

  Tin can I just sand the forest around a gouge to arrive even?

  

  Tanglewood Sue is a DIY and Upcycling Specialist and the Owner of Tanglewood Works out of Hyattsville, Maryland. With over nine years of experience, Sue specializes in upcycled painted furniture and other handmade, personalized, and sustainable goods. With her passion for art and reinvention, marketing experience, and Bachelor'south Caste in Circulate Media, Sue has been able to create a business organization that not but provides quality pieces just empowers customers to create their works through her library of DIY tutorials and live demos too every bit DIY supplies.

  

  DIY & Upcycling Specialist

  Expert Reply

  Yous can, but that's going to be a lot of sanding. Unless you're dealing with a very thin scratch or gouge, this is probably an inefficient way to go most it.

• Question

  Why do I have to sand the forest filler downward later on it dries?

  

  Tanglewood Sue is a DIY and Upcycling Specialist and the Owner of Tanglewood Works out of Hyattsville, Maryland. With over nine years of experience, Sue specializes in upcycled painted furniture and other handmade, personalized, and sustainable goods. With her passion for art and reinvention, marketing feel, and Bachelor'south Degree in Broadcast Media, Sue has been able to create a business that not simply provides quality pieces but empowers customers to create their works through her library of DIY tutorials and alive demos as well as DIY supplies.

  

  DIY & Upcycling Specialist

  Proficient Reply

  Well, you don't have to sand it down, just it's going to stand up out pretty badly if you don't. Sanding helps to create a uniform texture earlier y'all paint or stain it.

Ask a Question

200 characters left

Include your email address to go a message when this question is answered.

Submit

Advertising

• The in a higher place method can be used for all types of woods including teak.

Thanks for submitting a tip for review!

Advertisement

Things Yous'll Need

• Craft sticks
• Glue
• Wood glue
• Woods filler
• Disposable plate
• 120-grit sandpaper
• 220-grit sandpaper and pad sander (optional)
• Material
• Water-based pigment for indoors
• Oil-based paint for outdoors
• Paintbrush
• Roller
• Tissue
• Primer
• Sheets
• Painter's record

About This Article

Article Summary Ten

If yous've noticed a big hole in a piece of wood or article of furniture, you tin fix it with a few supplies from your local home comeback store. If the woods's kept indoors, use a water-based wood filler, primer, and pigment, merely if it's kept outdoors, utilise a solvent-based wood filler, oil-based primer, and paint. You'll too demand sandpaper and a paintbrush or roller. To make full the pigsty, you'll need to use the wood filler. Once it's stale later on an hour or so, sand the surface to brand it smooth. And so, prime and paint the surface so information technology blends in with the rest of the forest. You'll need to wait 2 to three hours between coats of primer and paint. For more tips, including how to cover utilize craft sticks to assist cover a pigsty from the inside, read on!

Did this summary help y'all?

Thanks to all authors for creating a page that has been read 79,463 times.

Did this article aid you?

schumacherdides1938.blogspot.com

Source: https://www.wikihow.com/Fill-Large-Holes-in-Wood

Share this post